0086-185 5336 8358
【Product introduction】
The Ceramic Fiber Module is made from ceramic fiber blanket. It is a new type of refractory furnace lining products aiming at simplifying and speeding up furnace construction and improving the integrity of furnace lining.
【Main Properties】
|
Modd |
Common |
Standard |
High-purity |
High-aluminum |
Zirconium |
|
Properties |
GW-112 |
GW-212 |
GW-312 |
GW-422 |
GW-512 |
|
Classification Temp（℃） |
1050 |
1260 |
1260 |
1400 |
1430 |
|
Working Temp（℃） |
1000 |
1100 |
1200 |
1200 |
1350 |
|
Color |
White |
||||
|
Ave fiber diameter |
3-6 |
2-5 |
2-4 |
2-4 |
1.5-4 |
|
Tensile strength（Mpa） |
0.08-0.12 |
||||
|
Rate of linear（%）（24hours）（Density 128kg/m³） |
-4/1000℃ |
-3/1000℃ |
-3/1000℃ |
-3/1250℃ |
-3/1250℃ |
|
Thermal conductivity（w/m.k）（Density 128kg/m³） |
0.086（400℃） 0.120（800℃） |
0.086（400℃） 0.120（800℃） |
0.086（400℃） 0.110（800℃） |
0.092（400℃） 0.186（1000℃） |
0.092（400℃） 0.186（1000℃） |
|
Density kg/mm |
96/128 |
96/128 |
128 |
128 |
128 |
|
AL2O3 |
44 |
46 |
47-49 |
52-55 |
39-40 |
|
AL2O3+SiO2 |
96 |
97 |
99 |
99 |
|
|
Fe2O3 |
＜1.2 |
≤1.0 |
0.2 |
0.2 |
0.2 |
|
K2O+Na2O |
≤0.5 |
≤0.25 |
0.2 |
0.2 |
0.2 |
|
Size（mm） |
7200*610*10-50 We also supply special size and type |
||||
Product Feature：
·Excellent chemical stability
·Excellent thermal stability
·Excellent flexibility, the module is in pre-compression state，after the lining masonry
·The Expansion of modules enable seamless lining,fiber lining can be compensated to improve
·Insulation performance of Fiber lining, and the overall performance is good
·Excellent thermal stability and thermal shock resistance
·Ceramic fiber module can be installed quickly,and anchors set in the wall lining,which can lower the requiement of anchor material
